Norelco QP2630/70 Bedienungsanleitung PDF herunterladen (Seite 3)

3 Place the blade on the skin and move

the product against the grain in long

strokes while pressing lightly. Stretch the

skin with your free hand.

Note: Make sure you hold the surface of

the blade at against your skin (Fig. 8).

- When you use the product on your

armpits, raise your arm and put your

hand on the back of your head to

stretch the skin.

4 Switch o and clean the product after

every use (see ‘Cleaning‘).

Trimming with body comb

The 3mm (1.8in.) body comb allows you to

trim hair on your body below the neckline

(for example chest, armpits, groin).

1 Hold the body comb on both sides and

press onto the blade (Fig. 19).

2 Switch the product on.

3 Place the comb onto the skin and stretch

the skin with your free hand. Move the

product upwards slowly, against the

grain (Fig. 20).

- Make sure that the at part of the

comb is always in full contact with the

skin to obtain an even trimming result

(Fig. 12).

- When you use the product on your

armpits, raise your arm and put your

hand on the back of your head to

stretch the skin.

- Regularly remove cut hair from the

guard. If a lot of hair has accumulated

in the guard, remove it from the

product and blow and/or shake out

the hairs.

4 Switch o and clean the product after

each use (see ‘Cleaning‘).

5 To remove the comb, hold it on both

sides and pull it o the blade (Fig. 15).

Cleaning

Clean the product after every use.

Never use scouring pads, abrasive

cleaning agents or aggressive liquids

such as gasoline or acetone to clean the

product.

- Since all hairs do not grow in the same

direction, you may want to try dierent

trimming positions (i.e. upwards,

downwards, or across). Practice is best

for optimum results.

- For the best result, move the product

against the grain.

- Make long strokes while pressing lightly.

- Use the product dry or wet with gel or

foam, even in the shower.

- Shaving a clean body gives the best

results.

Shaving with skin guard

For optimal performance, use the skin guard

only on sensitive areas (for example the

groin and armpits).

1 Hold the skin guard on both sides and

press onto the blade (Fig. 16).

2 Switch the product on (Fig. 6).

3 Place the skin guard onto the skin and

stretch the skin with your free hand.

Move the product upwards slowly,

against the grain (Fig. 17).

- When using the product on your

armpits, raise your arm and put your

hand on the back of your head to

stretch the skin.

- Regularly remove cut hair from the

guard. If a lot of hair has accumulated

in the guard, remove it from the

product and blow and/or shake out

the hairs.

4 Switch o and clean the product after

each use.

5 To remove the skin guard, put one nger

under the edge of the guard and press

on the blade with your thumb (Fig. 18).

Shaving without skin guard

The body blade without the skin guard

allows you to shave hair on your body

below the neckline (for example the chest).

1 To remove the skin guard, put one nger

under the edge of the guard and press

with your thumb on the blade (Fig. 18).

2 Switch the product on (Fig. 6).

5 Switch o and clean the product after

each use (see ‘Cleaning‘).

Trimming with comb

The click-on stubble combs allow you to

trim hair to dierent lengths. This product

comes with 4 click-on stubble combs: 5mm

(3/16in.), 3mm (1/8in.), 2mm (5/64in.) and

1mm (3/64in.). Start with the 5mm (3/16in.)

comb to acquire practice with this product.

The indication on each comb corresponds

to the remaining hair length in millimeters.

- Always make sure that the tips of the

click-on stubble comb point in the

direction in which you move the product.

- Make sure that the at part of the comb

is always in full contact with the skin to

obtain an even trimming result (Fig. 12).

- Since all hairs do not grow in the same

direction, you may want to try dierent

trimming positions (i.e. upwards,

downwards, or across). Practice is best

for optimum results.

- Trimming is easier when the skin and hair

are dry.

Place the comb onto the blade, with the

teeth of the comb pointing upwards (Fig. 13).

Note: For best results, always trim in the

direction of the teeth of the comb.

2 Switch the product on (Fig. 6).

3 Place the comb onto the skin and move

the product upwards slowly, against the

grain (Fig. 14).

4 Switch o and clean the product after

each use (see ‘Cleaning‘).

5 To remove the comb, hold it on both

sides and pull it o the blade (Fig. 15).

Body

- For hygienic reasons, only use the body

blade for trimming and shaving your

body.

- For body trimming and shaving, make

sure hair is clean and dry as wet hair

tends to stick to the body.

- When shaving sensitive areas, always use

the skin guard.

- Use the product with the body blade to

trim and/or shave your body hair. Shave

your chest without the skin guard or body

comb, shave your sensitive areas (e.g. groin,

armpits) with the skin guard, use the body

comb to trim your body.

- Take your time and practice to give your

skin time to adjust.

Switching the product on and o

Press the on/o button once to switch

the product on or o (Fig. 6).

Face

Shaving

- Make sure that the blade is in full contact

with the skin by placing it at on the skin.

- For the best result, move the product

against the grain.

- Make long strokes while pressing lightly.

- Use the product dry or wet with gel or

foam, even in the shower.

- Shaving a clean beard and face gives the

best results.

1 Switch the product on (Fig. 6).

2 Place the blade on the skin and move

the product up or against the grain in

long strokes while pressing lightly (Fig. 7).

Note: Make sure you hold the surface of

the blade at against your skin (Fig. 8).

3 Switch o and clean the product after

every use (see ‘Cleaning‘).

Edging

- Use both edges of the blade to create

sharp lines and perfect edges.

- Hold the product in such a way that

the blade is perpendicular to the skin

and one of its edges touches the skin.

This allows more precise detailing of

sideburns and the area around the

mouth and nose.

1 To create sharp edges and lines, you can

use either edge of the blade (Fig. 9).

2 Switch the product on (Fig. 6).

3 Place the edge of the blade

perpendicular onto the skin (Fig. 10).

4 Make straight strokes while applying

gentle pressure (Fig. 11).

1 2 3 4

Kommentare zu diesen Handbüchern

Keine Kommentare

Norelco QP2630/70 Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern